NAS FileZerver

How to configure a new RAID
During the initial system setup the opportunity to configure a RAID was available. If a second (or third, etc.) RAID is desired use the following method.

1. From the main administration page select Storage Configuration.
2. Select RAID Group Configuration.
3. Click on Create RAID Group.
4. Select the RAID level from the drop-down list.
5. Click on Continue.
6. Name the RAID and select the drives that will form the RAID.
7. Click on Continue.
8. A message confirming your choices appears. You can cancel the operation this time by clicking on Exit.
9. If everything is correct, click on OK.
10. A mesage confirming the RAID creation appears. There are two methods for proceeding from this point. You may click on Continue to create a share for the new RAID. Or you may click on Exit to return to the RAID page.

If you opt to create a share at this time, the share will point directly to /RAID. If you click on Exit and return to the RAID page, you can manually specify the share path from the Create Share link.