Virtual CD/DVD Server - CDM

Maintenance

Reset to Factory Defaults
Returns the system to its original, out of the box, configuration.

Reset
Restarts the Virtual DVD Server. All current user connections will be lost during this process.

Shutdown
Closes down the Virtual DVD Server. All current user connections will be lost during this process.

Firmware Upgrade
The operating system of the Virtual DVD Server is embedded in firmware. It may be upgraded using a web browser that supports file Upload functions (Netscape Navigator 2.0 or Internet Explorer 4.0 or higher).

Download the most recent firmware and unzip teh downloaded file. The resulting file will be a *.BIN file.

1. Click on the Firmware Upgrade link.
2. A warning page open that requires confirmation of the decision to enter the Upgrade mode.
3. Click on Yes to continue.
4. The Firmware Upgrade page will open.
   1. Enter the Upgrade Key if necessary. Minor firmware upgrades do not require a code.
   2. Click on Browse and navigate to the upgrade file that has been downloaded.
5. Click on Upgrade.

Clear all user databases
Empties the Virtual DVD Server bindery database that stores user accounts and permissions lists. Selecting this option will erase these databases. If User Level security is set for the Virtual DVD Server, there will be no user accounts to permit user access.A warning screen will open before the databases are cleared. Confirmation must be provided before the deletion proceeds.

Hard Drive Maintenance
Used to delete Imaged CDs and reformat the Virtual DVD Server hard drives.